Product Showcases

SPS Introduces New Locks, medipro Knee Joints and Liner

Loc-n-Load

The unique Loc-n-Load" AK lock by Creative Components" is now exclusively available from SPS.

The AK Loc-n-Load is the first and ONLY AK lock available in the O&P Industry. The AK Loc-n-Load is preflexed at 4.5 degrees and has a posterior offset 5/8" (1.5 cm) to allow easier alignment of the leg. The lock housing is anodized and wear surfaces are heat-treated for long life and durability.

It requires no special tools and is applicable for either thermoplastic or laminating fabrication techniques. A BK version* is also available.

Due to the long life and durability of the Loc-n-Load, O&P facilities using the unit have reported significant savings in both material and labor costs.

*Patents pending for both AK and BK versions of the Loc-n-Load lock.

Medipro Knee Joints

SPS introduces the medipro® Family of Knee Joints to the US O&P community. All the knees are designed for amputees of low to medium activity levels (K1-K2). The knee joints are lightweight, yet highly durable, and provide stable, fluid motion with various control options.

OP2 is a unique 4-bar polycentric joint designed to provide smooth, fluid motion. Resistant adjustments for flexion and extension are independently controlled to allow maximum synchronization with the amputee's stride and cadence. OP2 has independent swing phase flexion and extension resistances in a low-profile design.

OP3 is the ONLY single axis weight-activated locking knee with pneumatic swing phase control available in the United States. Made of lightweight metal alloys, this unique knee joint couples safety and stability with the fluid motion and smooth gait produced by a pneumatically controlled knee. 

OFM1 Locking Knee is a low-profile 4 bar polycentric joint which features added versatility by incorporating either manual locking OR manual friction swing phase control. It also provides adjustable friction swing phase control and adjustable extension assist.

The OM8 Polycentric Knee addresses the needs of geriatric and low-activity amputees (K1-K2). At 430g, the OM8 is an ultra-lightweight unit applicable for amputees weighing up to 100 kg/220 lbs.

Medipro Protect Liner

Extending the selection of medipro® liners available in the US, SPS announces the exclusive US distribution of the medipro® Protect liner. The semi-permeable membrane assures a soothing, soft interface specially formulated for users with conical limb shapes, less soft tissue distally, and highly sensitive skin, resulting in less skin friction for easier donning/doffing.

As an added incentive to try the new line of medipro knee joints and the new Protect liner, SPS is offering a free denim shirt with the purchase of any of the medipro knees or any combination of three medipro liners (Protect, Sensitive or Soft) with orders placed between September 1, 2002, and December 31, 2002. There is no limit on the number of free shirts an office or facility may receive.

For more information contact:

Molly Taylor
SPS
800.767.7776 " fax 800.869.7776
www.spsco.com

South West Orthopedic Designs Wishes You a Terrific 2003!

Thanks for making 2002 a successful year!
In 2003, well be expanding our product line to serve your growing needs.
We look forward to serving you.

Happy Holidays and Best Wishes to you and yours!

Chuck Eral
South West Orthopedic Designs LLC
480.332.8120 " fax: 480.664.3521
www.pttd.com

Look What’s New From WBC Industries

Free-Magic" brand fastener is a single component hook and loop fastener. Free-Magic is made by weaving alternating rows of nylon hook and loop on the same surface thus transforming into a one-piece, adjustable fastening system.

Benefits Include:

" No sewing needed.
" Reduced lint contamination.
" Eliminates color variations due to different dye lots of hook and loop.
" Fast and efficient, you control the length of the material used; you are always assured of proper fit and function.
" Can be used as an instant face-strap, which can be custom-fitted to the patient. 
" Sizes: 5/8" = .60 per yard

3/4" = .60 per yard
1" = .70 per yard 
1 1/2" = $1.55 per yard
2" = $1.65 per yard

For more information or to place an order, contact:

WBC Industries, Inc.
625 Central Avenue, Westfield, NJ 07090
800.818.2932 " fax: 908.232.5219
www.wbcindustries.com

Seattle Systems’ New Slide Sternal Extension

Seattle Systems, Poulsbo, Washington, presents the new Slide Sternal Extension. The Slide Sternal Extension attaches to the front of a spinal orthosis to give the patient added spinal support without applying unwanted pressure against the patient's chest, as is common with other braces.

The spring-loaded Slide Sternal Extension adjusts automatically to a shorter level when the person sits and expands when the person standsso no binding or unnecessary discomfort ensues.

The Slide Sternal Extension can be attached to most thoracic or body braces for the additional comfort and support that is necessary for most types of spinal injuries.

By preventing excessive bending of the spine fractures, the Slide Sternal Extension helps to hold weak bones securely so the individual may remain active. A soft interface lines each sternal pad to further increase comfort and compliance.

For more information, contact:

Customer Service
800.248.6463
customerservice@seattle-systems.com

Fillauer Gator Lock Meets High-Activity Challenge

Fillauer has created the first "all-conditions" clutch-type Gator Grip Lock to meet the needs of your most active patients in any environment, including freshwater, saltwater, muck, and grime.

This novel approach uses ball bearings in a wedge-fit arrangement to create a quiet, stepless lock that uses a one-of-a-kind smooth flexible pin. This flexible pin feature can be used to solve pin attachment alignment issues by flexing to find the distal opening. The modular Gator Grip Lock mechanism is interchangeable with a Delrin or pyramid attachment. A cylindrical Gator Grip Lock is being added soon.

For more information, contact:

Fran Varner-Jenkins
Fillauer Inc.®
2710 Amnicola Highway
Chattanooga, TN 37421
423.624.0946 " fax: 423.629.7936
info@fillauer.com " www.fillauer.com

Currier Coupling: New Laminated Socket Attachment Device

The new Currier Coupling is a laminated four-hole European-style socket attachment block. A vacuum-formable urethane is used instead of foam or wood as the connection material. When you place the Currier Coupling on the mold and apply vacuum, the urethane conforms to the cast, eliminating the need for any filling or blending.

Another nice feature is that on the coupling itself, a groove has been milled so that, when your PVA is in place and secured with the provided o-ring, the need to cap your inside bag is eliminated. The coupling also has milled standoffs, which dictate even laminates. When it is used with the finish plate that is provided, sanding on the distal end is kept at a minimum. The Currier Coupling is easy to use and saves time and money.

For more information, contact:

Creative Adaptations Inc.
292 St. James Avenue, Milton, NH 03851
603.652.7826
info@tcstop.com